|
|
A demonstration lab for building ventilation
Kundrát, Roman ; Štětina, Josef (referee) ; Charvát, Pavel (advisor)
Objective of this thesis is the design of ventilation system for demonstration laboratory. Based on literature studies, experience and advice of experts is at work introduced the concept of design of ventilation equipment for laboratory, which will serve to demonstrate the air inlet into the room using different diffusers. Introduction of distribution elements for ventilation, priors the actual design of laboratory.
|
|
| |
|
|
Experimental determination of the hydrodynamic load of the flooded bridge model
Naiser, Dominik ; Hrdlička, Libor (referee) ; Zubík, Pavel (advisor)
The diploma thesis deals with experimental determination of hydrodynamic load on the overflowed bridge deck model. In the first part of the thesis the author describes the analysis of the problem together with the basic physical laws and principles that are used or assumed in the measurement itself. In the second part the author describes the measurements in the laboratory of the Faculty of Civil Engineering and its gradual processing. At the end of the work are described the results of measurement, their comparison with numerical modeling, other authors and their possible use in practice.
|
|
|
BUT Technology Transfer Centre
Vojtěšek, Jiří ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The concept of design is in contrast rectangular mass units with a soft outer shell halls. This transparent ETFE foil sheath immaterial defines the basic volume halls. In contrast, there is the austere cubic mass, consisting of a layer of vertical adjustable curtains in red, which allow control of lighting conditions indoors. Working solution is based on the universality and flexibility of spatial concepts, for use of the area is variable, reflecting the wide professional profile Sciences and technically oriented part of the faculty. Building structure enables change of any user, modification technologies in short cycles and adaptability in terms of surface require. At the is used the principle of "shell and core", ie equipment basic service core is enclosed inside, and other equipment will be easily refillable according to the needs of a specific user. The design consists of three consecutive mass communication-related neck. At the first mass there is entrance space, sanitary facilities, offices, laboratories and technical facilities. At other two mass there are halls, the first is about half the size of the other. These indoor spaces can be variably split a total of 12 identical units (for each unit are the storage areas, sanitary facilities and offices) Storage areas are placed under the hall, as well as underground parking. Connecting neck serves not only to communicate as such, but it is a social or relaxing space. In this area at the same time meet all the staff and transmit a valuable experience.
|
|
| |
|
|
Constructional and Technological Project of Laboratoty Pavilion for Technology of AS in Brno
Cihelka, Karel ; Lukášková, Jana (referee) ; Mohapl, Martin (advisor)
The topic of this master thesis is dealing with selected parts of the constructional and technological project of laboratoty pavilion for technology of AS in Brno. Thesis is mainly focused for technological instructions of ground works, support of next building and solving of city center problems. Components of this thesis are evaluation plans and work place safety protocols. Next content of thesis are study of main technological phases, time and finanical plans, items budget, selected details, construction site equipment and design and verification of tower crain.
|
|
|
Optical cableless transmission
Němec, Filip ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This diploma thesis first handles the general issues concerning free space optics in the~atmosphere. The aim is to design and implementation of optical wireless equipment, which would serve in the laboratories of optical networks. Ronja was used as the basis for a~wireless link, which is already widespread in the world. Students will work with the device, which they may come into contact in the future. It consists several separate modules: transmitter, receiver and inteface. Each module have a separate chapter describing the~functional blocks and circuit realization. Ronja was adjusted for the needs of~laboratory tasks, where additional voltmeters measures received signal strength (RSSI) at~both ends of the link. Measuring device provides adjustment of power the transmitting LED via~computer, measures and sends RSSI values to a PC via~USB or RS232, turn off Ronja with computer. For targeting the pipes of Ronja was developed the mechanical design. In the last part of thesis the device was undergone a series of tests.
|
|
|
BUT Technology Transfer Center
Muroň, Jakub ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Skála, Jiří (advisor)
The Bachelor’s Thesis is based on the architectural study done in the summer semester of the third year of bachelor’s studies of the topic Technology tranfer cetre BUT in Brno. Area of Technology transfer centre of BUT (Brno university of technology) is composed of three separated units - two production complexes and main buidling, which is used for administration in first floor and laboratories in second floor. Design is conditioned by two criteria - an adaptation of objects structure to configuration of terrain and a flexibility of function and logistic. Solution to these issues was to create main communication connected with existing communication. It provides easy and fast logistic service for the production complexes. Shape of the buildings follows contour lines. Due to dynamic shapes I designed simple industrial monochromatic facade, which allows an experimentation with the mass of the building. Line of the flat roof was broken by simple skylights. Strip windows potentiate horizontality in contrast with the main building, which has vertically based character. Industrial character of the complex was accentuated by using metallic facade and prefabricated concrete construction.
|
|
|
Slithy, a blend of lithe and slimy
Šillerová, Kateřina ; Alster, Darina (referee) ; Hládeková, Katarína (advisor)
For my work Slithy, a Blend of Lithe and Slimy, a thought that consciousness appears even on the lowest levels of existence is essencial, I create an enviroment of a lab, in which spectator is in the role of another organism, surrounded by other organisms. I'm interested in relationship between microcosmos and macrocosmos and in seeing the same pattern through reality.
|
|
|
BUT Technology Transfer Centre
Jabůrková, Dominika ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
¨Bachelor thesis addresses the subject Technology Transfer Centre Brno - Královo pole- at Palacky hill in the technogy park Brno. TTC represents the institutional framework for the development and application of the results reserch at Brno University of Technology. It is also the contact point for companies interested in cooperation with the Technical University in the provided fields. The closest area is characterized by the proximity of different functions - universities, office spaces, space for light manufacturing, university colleges. The proposed building has four floors, simple monoblock, which replicates the shape of the land (trapezoid) is differentiated into 5 parts. These parts allow any hire parts of the object. The building have productions hall with private facilities, offices, laboratories and parking. The dominant feature is the entrance hall, which is glass and open. Entrance is framed with corteno sheet. In entrance hall is open staircase with corten banister, which is addressed in Part D in architectural detail. Supply object is behind the building, there are manipulating courts which are directly linked to the warehouses. The building is oriented mainly longitudinally - East west.
|
guest ::
